User's Manual
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Internet / Wireless Setup Wizard
- Tutorials
- 4.1 Overview
- 4.2 Setting Up Your DSL Connection
- 4.3 IPv6 Address Configuration
- 4.4 Setting Up a Secure Wireless Network
- 4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access
- 4.6 Setting Up NAT Forwarding for a Game Server
- 4.7 Configuring Firewall Rules to Allow a Specified Service
- 4.8 Configuring Static Route for Routing to Another Network
- 4.9 Port Binding Configuration
- 4.10 Configuring QoS to Prioritize Traffic
- 4.11 Access the AMG1302/AMG1202-TSeries from the Internet Using DDNS
- Connection Status and System Info Screens
- Broadband
- Wireless LAN
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
55
4d Click OK.
Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall
settings to allow specific traffic to pass through.
4.9 Port Binding Configuration
This tutorial shows you how to configure port binding for WAN connections with different ATM QoS
settings for different types of traffic. The port binding feature is used to group each WAN connection
with specific LAN ports and WLANs. In this example ATM QoS settings are configured for a WAN PVC
for time sensitive Media-On-Demand (MOD) traffic. ATM QoS settings are also configured for
another WAN PVC for non-time sensitive data traffic.
4.9.1 Configuring ATM QoS for Multiple WAN Connections
This example shows an application for multiple WAN connections with different ATM QoS Settings.
More than one WAN connection on the AMG1302/AMG1202-TSeries may be configured to record
traffic statistics or calculate service charges.
Three WAN connections are configured over the ADSL line:
• The connection with VPI/VCI, 0/33, is dedicated for general data transmission.
• The connection with VPI/VCI, 0/34, is dedicated for VoIP service.
• The connection with VPI/VCI, 0/35, is dedicated for Media-On-Demand (MOD) service.
To configure bandwidth for the WAN connections, access the WAN configuration Advanced Setup
screen by clicking Network Setting > Broadband. Click Advanced Setup.