User's Manual
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Internet / Wireless Setup Wizard
- Tutorials
- 4.1 Overview
- 4.2 Setting Up Your DSL Connection
- 4.3 IPv6 Address Configuration
- 4.4 Setting Up a Secure Wireless Network
- 4.5 Configuring the MAC Address Filter for Restricting Wireless Internet Access
- 4.6 Setting Up NAT Forwarding for a Game Server
- 4.7 Configuring Firewall Rules to Allow a Specified Service
- 4.8 Configuring Static Route for Routing to Another Network
- 4.9 Port Binding Configuration
- 4.10 Configuring QoS to Prioritize Traffic
- 4.11 Access the AMG1302/AMG1202-TSeries from the Internet Using DDNS
- Connection Status and System Info Screens
- Broadband
- Wireless LAN
- Home Networking
- Static Route
- Quality of Service (QoS)
- Network Address Translation (NAT)
- Port Binding
Chapter 4 Tutorials
AMG1302/AMG1202-TSeries User’s Guide
60
1 Click Network Setting > QoS and check Active QoS. Click Apply.
Tutorial: Advanced > QoS
2 Go to Network Setting > QoS > Queue Setup. Click the Edit icon next to an entry to configure
a queue.
3 Select Active and give it a name (Queue1 in this example). Select WAN in the Interface field and
1 in the Priority and Weight fields. Then click OK.
Tutorial: Advanced > QoS > Queue Setup
4 Go to Network Setting > QoS > Class Setup and click Add new Classifier.
5 Select Active and follow the settings as shown in the screen below. Then click OK. Note that you
have to select TCP in the IP Protocol field first, then you can configure the source port range
setting.