User Guide Part 1

Chapter 8 Home Networking
AMG1312-T Series User’s Guide
122
The following table describes the labels in this screen.
8.6 The IPv6 LAN Setup Screen
Use this screen to configure the IPv6 settings for your AMG1312-T Series’s LAN interface. See
Appendix E on page 277 for background information about IPv6.
Figure 53 Network Setting > Home Networking > IPv6 LAN Setup
Table 35 Network Setting > Home Networking > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open the
web configurator's login screen without entering the AMG1312-T Series's IP address (although
you must still enter the password to access the web configurator). Otherwise, select D isable to
deactivate UPnP.
Apply Click Apply to save your changes.
Cancel
Click Cance l to exit this screen without saving.