User Guide Part 1

Chapter 10 Quality of Service (QoS)
AMG1312-T Series User’s Guide
143
Mac Netmask Type the mask for the specified MAC address to determine which bits a packet’s MAC
address should match.
Enter “f” for each bit of the specified source MAC address that the traffic’s MAC address
should match. Enter “0” for the bit(s) of the matched traffic’s MAC address, which can be
of any hexadecimal character(s). For example, if you set the MAC address to
00:13:49:00:00:00 and the mask to ff:ff:ff:00:00:00, a packet with a MAC address of
00:13:49:12:34:56 matches this criteria.
Exclude Select this option to exclude the packets that match the specified criteria from this
classifier.
Others
IP Protocol This field is available only when you select I Pv4 or I Pv6 in the Et her Ty pe field.
If you select I Pv4 , select this option and select the protocol (service type) from TCP/
UD P, TCP, UDP or I CMP.If you select I Pv6 , select this option and select the protocol
(service type) from TCP/ UD P, TCP, UDP or I CMPv6 .
TCP ACK This field is available only when you select TCP in the I P pr ot ocol field.
If you select this option, the matched TCP packets must contain the ACK (Acknowledge)
flag.
Packet Length This field is available only when you select I Pv4 or I Pv6 in the Et h e r Type field.
Select this option and enter the minimum and maximum packet length (from 46 to 1500)
in the fields provided.
IPP/DS Field Select I PP/ TOS to specify an IP precedence range and type of services.
Select DSCP to specify a DiffServ Code Point (DSCP) range.
IP Precedence
Range
Enter a range from 0 to 7 for IP precedence. 0 is the lowest priority and 7 is the highest.
Typ e of
Service
Select a type of service from the drop-down list box.
Available options are: N orm a l se r vice , M in im ize de la y, Max im ize thr oughput,
Maxim ize relia bility and M inim ize m onetary cost.
DSCP Range Select this option and specify a DSCP (DiffServ Code Point) number between 0 and 63 in
the field provided.
802.1P Select this option and select a priority level (between 0 and 7) from the drop-down list
box.
"0" is the lowest priority level and "7" is the highest.
VLAN ID Select this option and enter the source VLAN ID in this field.
Exclude Select this option to exclude the packets that match the specified criteria from this
classifier.
Action
Forward To Select the interface through which traffic that matches the rule is forwarded out. If you
select Unch ange , the AMG1312-T Series forwards traffic of this class according to the
default routing table.
If traffic of this class comes from a WAN interface and is in a queue that forwards traffic
through the LAN/WLAN interface, the AMG1312-T Series ignores the setting here.
IPP/DS Field Select I PP/ TOS to specify an IP precedence range and type of services.
Select DSCP to specify a DiffServ Code Point (DSCP) range.
IP Precedence
Mark
Enter a range from 0 to 7 to re-assign IP precedence to matched traffic. 0 is the lowest
priority and 7 is the highest.
Table 47 QoS > Class Setup Add/Edit (continued)
LABEL DESCRIPTION