User Guide Part 2
Table Of Contents
- Dynamic DNS Setup
- Filters
- Firewall
- Parental Control
- Certificate
- Logs
- Traffic Status
- User Account
- TR-069 Client
- System Settings
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Diagnostic
- Troubleshooting
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
AMG1312-T Series User’s Guide 200
CHAPTER 21
TR-069 Client
21.1 Overview
The AMG1312-T Series supports TR-069 Amendment 1 (CPE WAN Management Protocol Release
2.0) and TR-069 Amendment 2 (CPE WAN Management Protocol v1.1, Release 3.0).
TR-069 is a protocol that defines how your AMG1312-T Series (ZD) can be managed via a
management server (MS) such as ZyXEL’s Vantage Access.
Figure 108 LAN and WAN
An administrator can use a management server to remotely set up the AMG1312-T Series, modify
settings, perform firmware upgrades as well as monitor and diagnose the AMG1312-T Series.
In order to use CWMP, you need to configure the following steps:
1 Activate CWMP
2 Specify the URL, username and password.
3 Activate periodic inform and specify an interval value.
21.2 The TR-069 Client Screen
Use this screen to configure your AMG1312-T Series to be managed by a management server. Click
Maintenance > TR-069 Client to display the following screen.
MSZD