User Guide Part 2

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N ADSL2+ 4-port Gateway with USB

Table Of Contents

Dynamic DNS Setup
- 13.1 Overview
  - 13.1.1 What You Can Do in the DDNS Screen
  - 13.1.2 What You Need To Know About DDNS
- 13.2 The Dynamic DNS Screen
Filters
- 14.1 Overview
  - 14.1.1 What You Can Do in the Filter Screens
  - 14.1.2 What You Need to Know About Filtering
- 14.2 The IP/MAC Filter Screen
- 14.3 IPv6/MAC Filter
Firewall
- 15.1 Overview
  - 15.1.1 What You Can Do in the Firewall Screens
  - 15.1.2 What You Need to Know About Firewall
- 15.2 The Firewall General Screen
- 15.3 The Default Action Screen
- 15.4 The Rules Screen
- 15.5 The DoS Screen
  - 15.5.1 The DoS Advanced Screen
  - 15.5.2 Configuring Firewall Thresholds
- 15.6 Firewall Technical Reference
Parental Control
- 16.1 Overview
- 16.2 The Parental Control Screen
  - 16.2.1 Add/Edit Parental Control Rule
Certificate
- 17.1 Overview
  - 17.1.1 What You Can Do in this Chapter
- 17.2 What You Need to Know
- 17.3 Local Certificates
- 17.4 The Trusted CA Screen
- 17.5 Trusted CA Import
- 17.6 View Certificate
Logs
- 18.1 Overview
  - 18.1.1 What You Can Do in this Chapter
  - 18.1.2 What You Need To Know
- 18.2 The System Log Screen
Traffic Status
- 19.1 Overview
  - 19.1.1 What You Can Do in this Chapter
- 19.2 The WAN Status Screen
- 19.3 The LAN Status Screen
- 19.4 The NAT Screen
User Account
- 20.1 Overview
- 20.2 The User Account Screen
TR-069 Client
- 21.1 Overview
- 21.2 The TR-069 Client Screen
System Settings
- 22.1 Overview
  - 22.1.1 What You Can Do in the System Settings Screens
- 22.2 The System Screen
- 22.3 The Time Screen
Firmware Upgrade
- 23.1 Overview
- 23.2 The Firmware Screen
Backup/Restore
- 24.1 Overview
- 24.2 The Backup/Restore Screen
- 24.3 The Reboot Screen
Remote Management
- 25.1 Overview
  - 25.1.1 What You Can Do in the Remote Management Screens
  - 25.1.2 What You Need to Know About Remote Management
- 25.2 The WWW Screen
  - 25.2.1 Configuring the WWW Screen
- 25.3 The Telnet Screen
- 25.4 The FTP Screen
- 25.5 The SNMP Screen
  - 25.5.1 Configuring SNMP
- 25.6 The DNS Screen
- 25.7 The ICMP Screen
- 25.8 The SSH Screen
  - 25.8.1 SSH Example
Diagnostic
- 26.1 Overview
  - 26.1.1 What You Can Do in the Diagnostic Screens
- 26.2 The General Screen
- 26.3 The DSL Line Screen
Troubleshooting
- 27.1 Power, Hardware Connections, and LEDs
- 27.2 AMG1312-T Series Access and Login
- 27.3 Internet Access
Setting up Your Computer’s IP Address
IP Addresses and Subnetting
Pop-up Windows, JavaScripts and Java Permissions
Wireless LANs
IPv6
Services
Legal Information
Index

Chapter 14 Filters

AMG1312-T Series User’s Guide

166

14.3 IPv6/MAC Filter

Use this screen to create and apply IPv6 filters. Click Security > Filter > IPv6/MAC Filter. The

screen appears as shown.

Figure 83 Security > Filter > IPv6/MAC Filter

The following table describes the labels in this screen.

Table 63 Security > Filter > IPv6/MAC Filter

LABEL DESCRIPTION

Rule Type

Rule Type selection Select White List to specify traffic to allow and Black List to specify traffic to

block.

IPv6 / MAC Filter Rule Editing

IPv6 / MAC Filter Rule Index Select the index number of the filter rule.

Active Use this field to enable or disable the filter rule.

Interface Select the PVC to which to apply the filter.

Direction Apply the filter to Incoming or Outgoing traffic direction.

Rule Type Select IP or MAC type to configure the rule.

Use the IP Filter to block or allow traffic by IPv6 addresses.

Use the MAC Filter to block or allow traffic by MAC address.

Source IP Address Enter the source IPv6 address of the packets you wish to filter. This field is

ignored if it is ::.

Source Prefix Length Enter the prefix length for the source IPv6 address

Destination IPv6 Address Enter the destination IPv6 address of the packets you wish to filter. This field is

ignored if it is ::.