User Guide Part 2
Table Of Contents
- Dynamic DNS Setup
- Filters
- Firewall
- Parental Control
- Certificate
- Logs
- Traffic Status
- User Account
- TR-069 Client
- System Settings
- Firmware Upgrade
- Backup/Restore
- Remote Management
- Diagnostic
- Troubleshooting
- Setting up Your Computer’s IP Address
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Wireless LANs
- IPv6
- Services
- Legal Information
- Index
Appendix A Setting up Your Computer’s IP Address
AMG1312-T Series User’s Guide
244
Figure 153 Macintosh OS X: Network
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your AMG1312-T Series in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your AMG1312-T Series and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer’s TCP/IP settings in Red Hat Linux 9.0.
Procedure, screens and file location may vary depending on your Linux distribution and release
version.
Note: Make sure you are logged in as the root administrator.