Installation Guide
Table Of Contents
- Copyright
- Limited Warranty
- Information for Canadian Users
- Federal Communications Commission (FCC) Interference Statement
- Customer Support
- List of Figures
- List of Tables
- Preface
- Wireless Network Basics
- Disable Windows XP Configuration Tool
- Using the Wireless LAN Utility
- Wireless LAN Security
- Advanced Configuration
- Removing and Upgrading the WLAN Utility
- Troubleshooting
- Index
Wireless LAN Utility
Wireless LAN Security 4-3
Table 4-1 WLAN Utility: Security
FIELD DESCRIPTION
Key 1 … 4 Enter the WEP keys in the fields provided.
If you select 64 Bits in the Encryption field.
Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(e.g. 11AA22BB33) for HEX key type
or
Enter 5 printable ASCII characters (case sensitive) ranging from “a-z”,
“A-Z” and “0-9” (e.g. MyKey) for ASCII key type.
If you select 128 Bits in the Encryption field,
Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(for example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 printable ASCII characters (case sensitive) ranging from “a-
z”, “A-Z” and “0-9” (for example, MyKey12345678) for ASCII key type.
You must configure all four WEP keys the first time you
use the WLAN Adapter.
ASCII WEP keys are case sensitive.
Restore Default
Click Restore Default to reset all fields back to factory default values.
Undo Changes
Click Undo Changes to start configuring the fields again.
Apply Changes
Click Apply Changes to save the changes back to WLAN Adapter.