User's Manual

ZyAIR Wireless LAN Utility
Using the ZyAIR Utility 2-13
Table 2-5 Security
LABEL DESCRIPTION
Passphrase
When you select the Create with Passphrase option, enter the passphrase. As
you enter the passphrase, the ZyAIR automatically generates four different
WEP keys and displays them in the key fields below. Write down the
automatically generated WEP keys in and use them to manually set the WEP
keys in other WLAN adapters.
The passphrase is case-sensitive. You must use the same passphrase for all
wireless LAN adapters with this feature in the same WLAN.
Manual Entry Select this option if you want to manually enter the WEP keys. Then select a
default WEP key to use for data encryption.
Key Type
Select either the HEX or ASCII WEP key type.
Key 1 … 4 Enter the WEP keys in the fields provided.
If you select 64 Bits in the Encryption field.
 Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(e.g. 11AA22BB33) for HEX key type
or
 Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and
“0-9” (e.g. MyKey) for ASCII key type.
If you select 128 Bits in the Encryption field,
 Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9”
(for example, 00112233445566778899AABBCC) for HEX key type
or
 Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z”
and “0-9” (for example, MyKey12345678) for ASCII key type.
You must configure all four WEP keys the first time you
use the ZyAIR.
ASCII WEP keys are case sensitive.
Restore Default
Click Restore Default to reset all fields back to factory default values.
Undo Changes
Click Undo Changes to start configuring the fields again.
Apply Changes
Click Apply Changes to save the changes back to ZyAIR.
OK
Click OK to save all changes and close the ZyAIR Utility.
Cancel
Click Cancel to discard changes and close the ZyAIR Utility.