User's Manual

Network Setting

 LAN

This sub-menu allows you to select the IP address mode and set up the related

configuration.

- Ethernet Interface:

Select the Use DHCP option when your network uses the DHCP server. When

the camera starts up, it will be assigned an IP address from the DHCP server

automatically.

Otherwise, select the Use fixed IP address option to assign the IP address

for the camera directly, including IP Address, Subnet Mask, Gateway, DNS1,

and DNS2.

Option Description

IP Address

Enter the IP address of the camera. The default setting is

“192.168.0.1”.

Subnet

Mask

Enter the Subnet Mask of the camera. The default setting is

“255.255.255.0”.

Gateway

Enter the default Gateway of the camera. The default setting

is “192.168.1.1”.

DNS1/2

DNS translates domain names into IP addresses. Enter the

DNS1 (Primary DNS) and DNS2 (Secondary DNS) that are

provided by ISP (Internet Service Provider).

When done, click Save.