User's Guide

ManualsBrandsZyXEL Communications ManualsElectronicsWireless N300 4-port USB Ethernet Gateway

100

Table Of Contents

Contents Overview
Table of Contents
Introduction
- 1.1 Overview
- 1.2 Applications
- 1.3 Ways to Manage the EMG1302-R10A
- 1.4 Good Habits for Managing the EMG1302-R10A
- 1.5 LEDs
- 1.6 The WPS Button
- 1.7 Wall Mounting
Introducing the Web Configurator
- 2.1 Overview
- 2.2 Login Accounts
- 2.3 Accessing the Web Configurator
- 2.4 Resetting the EMG1302-R10A
  - 2.4.1 Procedure to Use the RESET Button
Quick Start
- 3.1 Overview
- 3.2 Quick Start Setup
Monitor
- 4.1 Overview
- 4.2 What You Can Do
- 4.3 The Log Screen
  - 4.3.1 View Log
  - 4.3.2 Log Setting
- 4.4 DHCP Table
- 4.5 Packet Statistics
- 4.6 WLAN Station Status
Router Mode
- 5.1 Overview
- 5.2 Router Mode Status Screen
  - 5.2.1 Navigation Panel
Tutorials
- 6.1 Overview
- 6.2 Set Up a Wireless Network with WPS
  - 6.2.1 Push Button Configuration (PBC)
  - 6.2.2 PIN Configuration
- 6.3 Configure Wireless Security without WPS
  - 6.3.1 Configure Your Notebook
- 6.4 Using Multiple SSIDs on the EMG1302-R10A
  - 6.4.1 Configuring Security Settings of Multiple SSIDs
WAN
- 7.1 Overview
- 7.2 What You Can Do
- 7.3 What You Need To Know
  - 7.3.1 Configuring Your Internet Connection
  - 7.3.2 Multicast
- 7.4 Management WAN
  - 7.4.1 Add/Edit Internet Connection
  - 7.4.2 Bridge Encapsulation
- 7.5 Advanced WAN Screen
- 7.6 IPv6 Screen
Wireless LAN
- 8.1 Overview
- 8.2 What You Can Do
- 8.3 What You Should Know
- 8.4 General Wireless LAN Screen
- 8.5 Wireless Security
  - 8.5.1 No Security
  - 8.5.2 WPA2-PSK
- 8.6 More AP
  - 8.6.1 More AP Edit
- 8.7 MAC Filter
- 8.8 Wireless LAN Advanced Screen
- 8.9 Quality of Service (QoS) Screen
- 8.10 WPS Screen
- 8.11 WPS Station Screen
- 8.12 Scheduling Screen
- 8.13 WDS
LAN
- 9.1 Overview
- 9.2 What You Can Do
- 9.3 What You Need To Know
  - 9.3.1 IP Pool Setup
  - 9.3.2 LAN TCP/IP
- 9.4 LAN IP Screen
DHCP Server
- 10.1 Overview
- 10.2 What You Can Do
- 10.3 What You Need To Know
- 10.4 The DHCP General Screen
- 10.5 The DHCP Advanced Screen
- 10.6 The DHCP Client List Screen
Quality of Service (QoS)
- 11.1 Overview
  - 11.1.1 What You Can Do in the QoS Screens
  - 11.1.2 What You Need to Know About QoS
- 11.2 The Quality of Service General Screen
- 11.3 The Rule-based QoS Screen
  - 11.3.1 Adding a Rule
- 11.4 QoS Technical Reference
NAT
- 12.1 Overview
- 12.2 What You Can Do
- 12.3 What You Need To Know
- 12.4 The NAT General Screen
- 12.5 The NAT Port Forwarding Screen
- 12.6 The NAT Trigger Port Screen
- 12.7 The ALG Screen
DDNS
- 13.1 Overview
- 13.2 The DDNS General Screen
Routing
- 14.1 Overview
- 14.2 Static Route Screen
  - 14.2.1 Add/Edit Static Route Screen
- 14.3 The Dynamic Routing Screen
Interface Group
- 15.1 Overview
- 15.2 The Interface Group Screen
  - 15.2.1 Add Interface Group
Security
- 16.1 Overview
- 16.2 What You Can Do
- 16.3 What You Need To Know
- 16.4 The Firewall General Screen
- 16.5 The Firewall Services Screen
Content Filtering
- 17.1 Overview
- 17.2 What You Need To Know
- 17.3 Content Filter
IPv6 Firewall
- 18.1 Overview
- 18.2 The IPv6 Firewall Screen
Remote Management
- 19.1 Overview
- 19.2 What You Need to Know
  - 19.2.1 Remote Management and NAT
- 19.3 What You Can Do
- 19.4 The WWW Screen
- 19.5 The Telnet Screen
- 19.6 The SNMP Screen
- 19.7 The TR069 Screen
Universal Plug-and-Play (UPnP)
- 20.1 Overview
- 20.2 What You Need to Know
  - 20.2.1 NAT Traversal
  - 20.2.2 Cautions with UPnP
- 20.3 UPnP Screen
- 20.4 Technical Reference
  - 20.4.1 Using UPnP in Windows XP Example
  - 20.4.2 Web Configurator Easy Access
Maintenance
- 21.1 Overview
- 21.2 What You Can Do
- 21.3 General Screen
- 21.4 Account Screen
  - 21.4.1 Account Setup Screen
- 21.5 Time Setting Screen
- 21.6 Firmware Upgrade Screen
- 21.7 Configuration Backup/Restore Screen
- 21.8 Restart Screen
Troubleshooting
- 22.1 Overview
- 22.2 Power, Hardware Connections, and LEDs
- 22.3 EMG1302-R10A Access and Login
- 22.4 Internet Access
- 22.5 Resetting the EMG1302-R10A to Its Factory Defaults
- 22.6 Wireless Router/AP Troubleshooting
Customer Support
Pop-up Windows, JavaScript and Java Permissions
Wireless LANs
Common Services
Legal Information
Index

Chapter 10 DHCP Server

EMG1302-R10A User’s Guide

100

10.6 The DHCP Client List Screen

This screen allows you to review the list of the devices currently connected to the EMG1302-R10A.

To view your EMG1302-R10A’s DHCP client list, click Configuration > Network > DHCP Server >

Client List. The following screen displays.

Figure 53 Configuration > Network > DHCP Server > Client List

The following table describes the labels in this screen.

First DNS Server

Second DNS Server

Select From ISP if your ISP dynamically assigns DNS server information (and the

EMG1302-R10A's WAN IP address). The field to the right displays the (read-only) DNS

server IP address that the ISP assigns.

Select User-Defined if you have the IP address of a DNS server. Enter the DNS

server's IP address in the field to the right. If you chose User-Defined, but leave the

IP address set to 0.0.0.0, User-Defined changes to None after you click Apply. If you

set a second choice to User-Defined, and enter the same IP address, the second

User-Defined changes to None after you click Apply.

Select DNS Relay to have the EMG1302-R10A act as a DNS proxy. The EMG1302-

R10A's LAN IP address displays in the field to the right (read-only). The EMG1302-R10A

tells the DHCP clients on the LAN that the EMG1302-R10A itself is the DNS server.

When a computer on the LAN sends a DNS query to the EMG1302-R10A, the EMG1302-

R10A forwards the query to the EMG1302-R10A's system DNS server (configured in the

WAN > Internet Connection screen) and relays the response back to the computer.

You can only select DNS Relay for one of the three servers; if you select DNS Relay

for a second or third DNS server, that choice changes to None after you click Apply.

Select None if you do not want to configure DNS servers. If you do not configure a DNS

server, you must know the IP address of a computer in order to access it.

Apply Click Apply to save your changes back to the EMG1302-R10A.

Cancel Click Cancel to begin configuring this screen afresh.

Table 34 Configuration > Network > DHCP Server > Advanced (continued)

LABEL DESCRIPTION

Table 35 Configuration > Network > DHCP Server > Client List

LABEL DESCRIPTION

DHCP Client Table

# This is the index number of the client device.

Status This shows the status of the connected device.

Host Name This indicates the device’s host name.

IP Address This indicates the IP address assigned to this client device.