User's Guide

Chapter 12 NAT
EMG1302-R10A User’s Guide
112
12.4 The NAT General Screen
Use this screen to enable NAT and set a default server. Click Configuration > Network > NAT to
open the General screen.
Figure 60 Configuration > Network > NAT > General
The following table describes the labels in this screen.
12.5 The NAT Port Forwarding Screen
Port forwarding allows you to define the local servers to which the incoming services will be
forwarded. This screen allows you to create or edit a port forwarding rule. To change your
EMG1302-R10A’s NAT port forwarding settings, click Configuration > Network > NAT > Port
Forwarding. The screen appears as shown.
Figure 61 Configuration > Network > NAT > Port Forwarding
Table 42 Configuration > Network > NAT > General
LABEL DESCRIPTION
Network Address
Translation(NAT)
Network Address Translation (NAT) allows the translation of an Internet protocol
address used within one network (for example a private IP address used in a local
network) to a different IP address known within another network (for example a public
IP address used on the Internet).
Select the check box to enable NAT.
NAT Loopback
Apply Click Apply to save your changes back to the EMG1302-R10A.
Reset Click Reset to begin configuring this screen afresh.