User's Guide
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Monitor
- Router Mode
- Tutorials
- WAN
- Wireless LAN
- LAN
- DHCP Server
- Quality of Service (QoS)
- NAT
- DDNS
- Routing
- Interface Group
- Security
- Content Filtering
- IPv6 Firewall
- Remote Management
- Universal Plug-and-Play (UPnP)
- Maintenance
- Troubleshooting
- Customer Support
- Pop-up Windows, JavaScript and Java Permissions
- Wireless LANs
- Common Services
- Legal Information
- Index
![](/manual/zyxel-communications/emg1302r10a/user-s-guide-english/images/img-117.png)
EMG1302-R10A User’s Guide 117
CHAPTER 13
DDNS
13.1 Overview
Dynamic Domain Name Service (DDNS) services let you use a fixed domain name with a dynamic
IP address. Users can always use the same domain name instead of a different dynamic IP address
that changes each time to connect to the EMG1302-R10A or a server in your network.
Note: The EMG1302-R10A must have a public global IP address and you should have your
registered DDNS account information on hand.
13.2 The DDNS General Screen
To change your EMG1302-R10A’s DDNS, click Configuration > Network > DDNS. The General
screen appears as shown.
Figure 64 Configuration > Network > Dynamic DNS > Dynamic DNS
The following table describes the labels in this screen.
Table 46 Configuration > Network > Dynamic DNS > Dynamic DNS
LABEL DESCRIPTION
IPv4 Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS.