User's Guide
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Monitor
- Router Mode
- Tutorials
- WAN
- Wireless LAN
- LAN
- DHCP Server
- Quality of Service (QoS)
- NAT
- DDNS
- Routing
- Interface Group
- Security
- Content Filtering
- IPv6 Firewall
- Remote Management
- Universal Plug-and-Play (UPnP)
- Maintenance
- Troubleshooting
- Customer Support
- Pop-up Windows, JavaScript and Java Permissions
- Wireless LANs
- Common Services
- Legal Information
- Index
![](/manual/zyxel-communications/emg1302r10a/user-s-guide-english/images/img-118.png)
Chapter 13 DDNS
EMG1302-R10A User’s Guide
118
Service Provider Select the name of your Dynamic DNS service provider.
Host Name The host name is the domain name that the DDNS service will map to your dynamic
global IP address. Type the host name fully qualified, for example,
‘yourhost.mydomain.net’. You can specify up to two host names in the field separated
by a comma (",").
User Name Type the user name that you used when you registered with the DDNS service.
Password Type the password associated with the DDNS user name.
IPv6 Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS.
Service Provider Select the name of your Dynamic DNS service provider.
Host Name The host name is the domain name that the DDNS service will map to your dynamic
global IP address. Type the host name fully qualified, for example,
‘yourhost.mydomain.net’. You can specify up to two host names in the field separated
by a comma (",").
Token This is the token authentication provided by the hosting provider (i.e. FreeDDNS).
When the host name is registered, the hosting server provides the token identifier.
Apply Click Apply to save your changes back to the EMG1302-R10A.
Cancel Click Cancel to exit this screen without saving.
Table 46 Configuration > Network > Dynamic DNS > Dynamic DNS (continued)
LABEL DESCRIPTION