User's Guide
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Monitor
- Router Mode
- Tutorials
- WAN
- Wireless LAN
- LAN
- DHCP Server
- Quality of Service (QoS)
- NAT
- DDNS
- Routing
- Interface Group
- Security
- Content Filtering
- IPv6 Firewall
- Remote Management
- Universal Plug-and-Play (UPnP)
- Maintenance
- Troubleshooting
- Customer Support
- Pop-up Windows, JavaScript and Java Permissions
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 6 Tutorials
EMG1302-R10A User’s Guide
44
Note: Your EMG1302-R10A has a WPS button located on top panel, as well as a WPS
button in its configuration utility. Both buttons have exactly the same function; you
can use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The EMG1302-R10A sends the proper configuration settings to the wireless client. This may take up
to two minutes. Then the wireless client is able to communicate with the EMG1302-R10A securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both EMG1302-R10A and wireless client (the in this example).
Figure 22 Example WPS Process: PBC Method
6.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both EMG1302-R10A’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number to the PIN field in the Configuration > Network > Wireless LAN > WPS
Station screen on the EMG1302-R10A.
Wireless Client
Access Point
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES