User's Guide
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Monitor
- Router Mode
- Tutorials
- WAN
- Wireless LAN
- LAN
- DHCP Server
- Quality of Service (QoS)
- NAT
- DDNS
- Routing
- Interface Group
- Security
- Content Filtering
- IPv6 Firewall
- Remote Management
- Universal Plug-and-Play (UPnP)
- Maintenance
- Troubleshooting
- Customer Support
- Pop-up Windows, JavaScript and Java Permissions
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 6 Tutorials
EMG1302-R10A User’s Guide
46
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.3 on page 19).
1 Make sure the WLAN switch (at the back panel of the EMG1302-R10A) is set to ON.
2 Open the Configuration > Network > Wireless LAN > General screen in the AP’s Web
Configurator.
3 Confirm that the status of wireless LAN is ON.
4 Enter SSID_Example3 as the SSID and select Channel-06 as the channel. Set security to WPA2-
PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply.l