User's Guide
Table Of Contents
- Contents Overview
- Table of Contents
- Introduction
- Introducing the Web Configurator
- Quick Start
- Monitor
- Router Mode
- Tutorials
- WAN
- Wireless LAN
- LAN
- DHCP Server
- Quality of Service (QoS)
- NAT
- DDNS
- Routing
- Interface Group
- Security
- Content Filtering
- IPv6 Firewall
- Remote Management
- Universal Plug-and-Play (UPnP)
- Maintenance
- Troubleshooting
- Customer Support
- Pop-up Windows, JavaScript and Java Permissions
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 7 WAN
EMG1302-R10A User’s Guide
59
7.4 Management WAN
Use this screen to view, change, or add your EMG1302-R10A’s Internet access settings. Click
Configuration > Network > WAN. The following screen opens.
Figure 27 Configuration > Network > Management WAN
The following table describes the labels in this screen.
Table 11 Configuration > Network > Management WAN
LABEL DESCRIPTION
Add New WAN Entry Click this to create a new WAN interface entry.
# This is the index number of the connection.
Default Select the WAN interface that you want to configure as default.
Name This is the service name of the connection.
Interface This is the interface of the connection.
Type This shows the type of interface used by this connection.
VLAN ID This indicates the VLAN ID number assigned to traffic sent through this connection.
IP Address This is the WAN IP address used by this connection.
Status This shows the status of the connection.
Modify Click the Edit icon to configure the connection.
Click the Delete icon to delete this connection from the EMG1302-R10A. A window
displays asking you to confirm that you want to delete the connection.