User`s guide

Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
153
Select the language you prefer and click Apply. The Web Configurator language changes after a
while without restarting the EMG2926-Q10A. At the time of writing, you can only select English or
Francais.
Figure 107 Maintenance > Language
24.8 System Operation Mode Overview
The Sys OP Mode (System Operation Mode) function lets you configure your EMG2926-Q10A as a
router or access point. You can choose between Router Mode, and Access Point Mode depending
on your network topology and the features you require from your device.
The following describes the device modes available in your EMG2926-Q10A.
Router
A router connects your local network with another network, such as the Internet. The router has
two IP addresses, the LAN IP address and the WAN IP address.
Figure 108 LAN and WAN IP Addresses in Router Mode
Access Point
An access point enables all ethernet ports to be bridged together and be in the same subnet. To
connect to the Internet, another device, such as a router, is required.