User`s guide

Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
154
Figure 109 Access Point Mode
24.9 Sys OP Mode Screen
Use this screen to select how you want to use your EMG2926-Q10A.
Figure 110 Maintenance > Sys OP Mode
The following table describes the labels on the General screen.
Table 74 Maintenance > Sys OP Mode
LABEL DESCRIPTION
Configuration Mode
Router Mode Select Router Mode if your device routes traffic between a local network and
another network such as the Internet. This mode offers services such as a firewall
or bandwidth management.
You can configure the IP address settings on your WAN port. Contact your ISP or
system administrator for more information on appropriate settings.