User`s guide

Chapter 4 Easy Mode
EMG2926-Q10A User’s Guide
35
The following table describes the labels on this screen.
4.4.3 Firewall
Enable this feature to protect the network from Denial of Service (DoS) attacks. The EMG2926-
Q10A blocks repetitive pings from the WAN that can otherwise cause systems to slow down or
hang. Click the Firewall icon in the control panel of the Easy Mode to open the screen shown
next. See Chapter 15 on page 110 for how to enable and configure firewall rules.
Figure 25 Firewall
Click OK to close this screen.
4.4.4 Internet Settings
Use this screen to configure your EMG2926-Q10A for Internet access. You should already have
Internet account information from your ISP. The screen varies depending on the Internet
connection type you selected. Click the Internet Setting icon in the control panel of the Easy
Mode to open the screen shown next.
Table 13 Parental Controls
LABEL DESCRIPTION
Status This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not
active.
Network User
(MAC)
This shows the MAC address of the LAN user’s computer to which this rule applies.
Internet Access
Schedule
This shows the day(s) and time when parental controls are enabled.
Network Service This shows whether the network service is configured. If not, NONE will be shown.
Website Blocked This shows whether the website block is configured. If not, NONE will be shown.