User`s guide

Chapter 5 Router Mode
EMG2926-Q10A User’s Guide
43
The following table describes the labels shown on the Status screen.
Select a number of seconds or None from the drop-down list box to refresh all screen
statistics automatically at the end of every time interval or to not refresh the screen
statistics.
Click this button to refresh the status screen statistics.
Click this icon to see the Status page. The information on this screen depends on the
device mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.
Table 18 Status Screen Icon Key (continued)
ICON DESCRIPTION
Table 19 Status Screen: Router Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode to which the EMG2926-Q10A is set - Router Mode.
WAN Information
MAC Address This shows the WAN Ethernet adapter MAC Address of your device.
IP Address This shows the WAN port’s IP address.
IP Subnet Mask This shows the WAN port’s subnet mask.
Default Gateway This shows the WAN port’s gateway IP address.
IPv6 Address This shows the IPv6 address of the EMG2926-Q10A on the WAN.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Server or Disable.
IPv6 Address This shows the IPv6 address of the EMG2926-Q10A on the LAN.
WLAN 2.4G Information
WLAN OP Mode This is the device mode to which the EMG2926-Q10A’s wireless LAN is set - Access Point
Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the EMG2926-Q10A in the 2.4GHz wireless
LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the EMG2926-Q10A is using.
WLAN 5G Information