User`s guide

Chapter 6 Tutorials
EMG2926-Q10A User’s Guide
50
3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the
EMG2926-Q10A’s WPS Station screen within two minutes.
The EMG2926-Q10A authenticates the wireless client and sends the proper configuration settings to
the wireless client. This may take up to two minutes. Then the wireless client is able to
communicate with the EMG2926-Q10A securely.
The following figure shows you an example of how to set up wireless network and security on
EMG2926-Q10A and wireless client (ex. NWD210N in this example) by using the PIN method.
Figure 35 Example WPS Process: PIN Method
6.3 Configure Wireless Security without WPS
This example shows you how to configure wireless security settings with the following parameters
on your EMG2926-Q10A.
Follow the steps below to configure the wireless settings on your EMG2926-Q10A.
WITHIN 2 MINUTES
Wireless Client
Access Point
SSID SSID_Example3
Channel 6
Security WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)