User's Manual

Chapter 11 Wireless LAN
EMG2926-Q10A User’s Guide
103
Figure 65 Network > Wireless LAN 2.4G/5G > MAC Filter
The following table describes the labels in this menu.
Table 38 Network > Wireless LAN 2.4G/5G > MAC Filter
LABEL DESCRIPTION
SSID Select Select the SSID for which you want to configure MAC filtering.
MAC Address
Filter
Select to turn on (Enable) or off (Disa ble) MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the EMG2926-Q10A, MAC addresses not listed will be
denied access to the EMG2926-Q10A.
Select De ny to block access to the EMG2926-Q10A, MAC addresses not listed will be allowed
to access the EMG2926-Q10A.
MAC Filter Summary
Set This is the index number of the MAC address.
MAC Address Enter the MAC address of the wireless station that are allowed or denied access to the
EMG2926-Q10A.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cance l to reload the previous configuration for this screen.