User's Manual

Chapter 14 NAT
EMG2926-Q10A User’s Guide
123
14.3.1 Port Forwarding Edit Screen
This screen lets you edit a port forwarding rule. Click a rule’s Edit icon in the Port Forw a r din g
screen to open the following screen.
Figure 83 Network > NAT > Port Forwarding Edit
Server IP Address Select a DHCP client as the virtual server and click Add to add it in the port forwarding
summary table.
Otherwise, select Cust om and manually enter the inside IP address of the virtual server
here.
# This is the number of an individual port forwarding server entry.
Status This icon is turned on when the rule is enabled.
Name This field displays a name to identify this rule.
Protocol This is the transport layer protocol used for the service.
WAN Interface This is the WAN interface of the rule.
Port This is the internal port number(s) that identifies the service.
Translation Port
Range
This is the external port number(s) that identifies the service.
Server IP Address This field displays the inside IP address of the server.
Modify Click the Edit icon to open the edit screen where you can modify an existing rule.
Click the Delete icon to remove a rule.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
Table 52 Network > NAT > Port Forwarding (continued)
LABEL DESCRIPTION