User's Manual

Chapter 21 StreamBoost Management
EMG2926-Q10A User’s Guide
150
21.2 What You Can Do
•Use the Ne t w ork screen to view transmission data rates between the EMG2926-Q10A and the
Internet or conencted devices (
Section 21.3 on page 150).
•Use the Bandw idt h screen to configure the maximum allowable bandwidth and enable
automatic update(Section 21.4 on page 150).
•Use the Priorit ie s screen to prioritize the connected devices (
Section 21.5 on page 152).
•Use the Up Tim e screen to view the top five traffic flows transmitting from/to the selected LAN
device(s) (Section 21.6 on page 152).
•Use the Dow nloads screen to view the type and percentage of most download traffic (
Section
21.7 on page 152
).
•Use the All Event s screen to view the time at which a traffic flow is given bandwidth for optimal,
good or best-effort performance (Section 21.8 on page 153).
21.3 Network Screen
When the StreamBoost feature is enabled, use this screen to view the current upstream and
downstream transmission speeds between the EMG2926-Q10A and the Internet and/or between
the EMG2926-Q10A and the connected device(s) (represented by icons indicating the kind of
network device), including those connecting wirelessly.
Click M a nagem ent > St rea m Boost MGM T > N et w ork to open the Ne t w ork screen.
Figure 99 Management > StreamBoost Management > Network
21.4 Banwidth Screen
Use this screen to configure the maximum allowable bandwidth on the EMG2926-Q10A and allow
the EMG2926-Q10A to get StreamBoost database updates automatically.
Click M a nagem ent > St rea m Boost MGM T > Bandw idt h to open the Bandw idt h screen.