User's Manual

Chapter 21 StreamBoost Management
EMG2926-Q10A User’s Guide
151
Figure 100 Management > StreamBoost Management > Bandwidth
The following table describes the labels in this screen.
Table 64 Management > StreamBoost Management > Bandwidth
LABEL DESCRIPTION
Enable
Streamboost
Select this option to turn on the StreamBoost feature. This field is not configurable at
the time of writing.
Automatic
Bandwidth
Detection
Select this option to control the maximum or minimum amounts of bandwidth that can
be used by traffic.
Up Limit Set the total amount of bandwidth that you want to dedicate to uplink (or outgoing)
traffic. This is traffic from LAN/WLAN to WAN.
Down Limit Set the total amount of bandwidth that you want to dedicate to downlink (or incoming)
traffic. This is traffic from WAN to LAN/WLAN.
Run Bandwidth Test Click Te st Bandw idth to determine the maximum bandwidth of your internet
connection.
Enable Automatic
Update
StreamBoost provides a cloud-based service to learn any new type of traffic which is not
in its database and update the table in the EMG2926-Q10A for traffic detection and
policies.
Select this option to have theEMG2926-Q10A automatically receives the StreamBoost
table updates. When there is a new type of traffic which is not in the EMG2926-Q10A’s
table, the EMG2926-Q10A will capture some packets and send them to the StreamBoost
cloud for analysis and database update.