User's Manual

EMG2926-Q10A User’s Guide
154
CHAPTER 22
Remote Management
22.1 Overview
This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your EMG2926-Q10A from a remote location through
the following interfaces:
•LAN and WAN
•LAN only
•WAN only
Note: The EMG2926-Q10A is managed using the Web Configurator.
22.2 What You Can Do in this Chapter
•Use the W W W screen to define the interface/s from which the EMG2926-Q10A can be managed
remotely using the web and specify a secure client that can manage the EMG2926-Q10A (
Section
22.4 on page 155
).
•Use the Te lnet screen to define the interface/s from which the EMG2926-Q10A can be managed
remotely using Telnet service and specify a secure client that can manage the EMG2926-Q10A
(
Section 22.5 on page 156).
•Use the W a k e On LAN screen to enable Wake on LAN and remotely turn on a device on the local
network (Section 22.7 on page 159).
22.3 What You Need to Know
Remote management over LAN or WAN will not work when:
1 The IP address in the Secured Clie n t I P Address field (
Section 22.4 on page 155) does not match
the client IP address. If it does not match, the EMG2926-Q10A will disconnect the session
immediately.
2 There is already another remote management session. You may only have one remote
management session running at one time.
3 There is a firewall rule that blocks it.