User's Manual

Chapter 24 USB Media Sharing
EMG2926-Q10A User’s Guide
172
24.7 FTP Screen
Use this screen to set up file sharing via the EMG2926-Q10A using FTP and create user accounts.
Click M a nagem ent > USB M edia Sh a ring > FTP.
Figure 124 Management > USB Media Sharing > FTP
USB1/2 Specify the user’s access rights to the USB storage device which is connected to the
EMG2926-Q10A’s USB port.
Read & W rit e - The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the
connected USB device.
User Accounts Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
# This is the index number of the user account.
Enable This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
User Name Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Password Enter the password used to access the shared files. You can enter up to 20 characters.
Only letters and numbers are allowed. The password is case sensitive.
USB1/2 Select the USB port(s) of the EMG2926-Q10A. The configured user can access the files
on the USB device(s) connected to the selected USB port(s) only.
Apply Click App ly to save your changes back to the EMG2926-Q10A.
Cancel Click Ca n cel to begin configuring this screen afresh.
Table 71 Management > USB Media Sharing > SAMBA (continued)
LABEL DESCRIPTION