User's Manual

Chapter 26 Maintenance
EMG2926-Q10A User’s Guide
180
The following table describes the labels in this screen.
26.4 Account Screen
It is strongly recommended that you change the password of the user account.
If you forget
your login account password (or IP address), you will need to reset the device. See
Section 26.8 on page 186 for details.
Click M a int enance > Account . The screen appears as shown.
Figure 127 Maintenance > Account
The following table describes the labels in this screen.
26.4.1
Edit a Users Account
Use this screen to edit a users account. Click the Edit icon next to the user account you want to
edit. The Account Se tup screen displays as shown.
Table 74 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the EMG2926-Q10A in an Ethernet network.
Domain Name Enter the domain name you want to give to the EMG2926-Q10A.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times
out. The default is 5 minutes. After it times out you have to log in with your password
again. Very long idle timeouts may have security risks. A value of "0" means a
management session never times out, no matter how long it has been left idle (not
recommended).
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Ca nce l to begin configuring this screen afresh.
Table 75 Maintenance > Account
LABEL DESCRIPTION
# This the index number of the entry.
User Name This field displays the name of the user.
Group This field displays the login account type of the user.
Different login account types have different privilege levels. The web configurator
screens and privileges vary depending on which account type you use to log in.
Modify Click the Edit icon to go to the screen where you can edit the account.