User's Manual

Chapter 2 Connection Wizard
EMG2926-Q10A User’s Guide
21
Figure 9 Internet Connection Type: IPoE
The following table describes the labels in this screen.
Note: If you get an error screen after clicking N ex t , you might have selected the wrong
Internet Connection type. Click Ba ck, make sure your Internet connection is
working and select the right Connection Type. Contact your ISP if you are not sure
of your Internet Connection type.
Table 4 Internet Connection Type: IPoE
LABEL DESCRIPTION
Internet Connection Type Select the I PoE option.
Obtain an IP Address
Automatically
Select this radio button if your ISP did not assign you a fixed IP address.
Static IP Address Select this radio button if your ISP assigned an IP address for your Internet
connection.
IP Address Enter the IP address provided by your ISP.
Subnet Mask Enter the IP subnet mask in this field.
Gateway IP Address Enter the gateway IP address in this field.
First DNS Server
Second DNS Server
Select Obtained From I SP if your ISP dynamically assigns DNS server
information (and the EMG2926-Q10A's WAN IP address). The field to the right
displays the (read-only) DNS server IP address that the ISP assigns.
Select User- D efine d if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right.
Select N on e if you do not want to configure DNS servers. If you do not configure
a DNS server, you must know the IP address of a computer in order to access it.
Exit Click this to close the wizard screen without saving.
Back Click this to return to the previous screen.
Next Click this to continue.