User's Manual

EMG2926-Q10A User’s Guide
43
CHAPTER 6
Router Mode
6.1 Overview
The EMG2926-Q10A is set to router mode by default. Routers are used to connect the local network
to another network (for example, the Internet). In the figure below, the EMG2926-Q10A connects
the local network (LAN1 ~ LAN4 ) to the Internet.
Figure 32 EMG2926-Q10A Network
Note: The St atu s screen is shown after changing to the Ex pe rt M ode of the Web
Configurator. It varies depending on the device mode of your EMG2926-Q10A.
6.2 Router Mode Status Screen
Click to open the status screen.
Modem