User's Manual

Chapter 8 Tutorials
EMG2926-Q10A User’s Guide
58
Note: Your EMG2926-Q10A has a WPS button located on its panel, as well as a WPS
button in its configuration utility. Both buttons have exactly the same function; you
can use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The EMG2926-Q10A sends the proper configuration settings to the wireless client. This may take up
to two minutes. Then the wireless client is able to communicate with the EMG2926-Q10A securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both EMG2926-Q10A and wireless client (the NWD210N in this example).
Figure 41 Example WPS Process: PBC Method
8.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both EMG2926-Q10A’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number to the PI N field in the Configura t ion > Net w ork > W ireless LAN 2 .4 G >
W PS St a t ion screen on the EMG2926-Q10A.
Wireless Client
Access Point
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES