User's Manual
Table Of Contents
- EMG2926-Q10A
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Static Route
- Firewall
- Content Filtering
- Parental Control
- IPv6 Firewall
- StreamBoost Management
- Remote Management
- Universal Plug-and-Play (UPnP)
- USB Media Sharing
- Port Configuration
- Maintenance
- Troubleshooting
- Legal Information
- Index
Chapter 8 Tutorials
EMG2926-Q10A User’s Guide
61
5 Open the Sta t us screen. Verify your wireless and wireless security settings under Device
I nform a t ion and check if the WLAN connection is up under I nte r fa ce St at us.
8.3.1 Configure Your Notebook
Note: We use the ZyXEL NWD2205 wireless adapter utility screens as an example for the
wireless client. The screens may vary for different models.
1 The EMG2926-Q10A supports IEEE 802.11a, IEEE 802.11b, IEEE 802.11g and IEEE 802.11n
wireless clients. Make sure that your notebook or computer’s wireless adapter supports one of
these standards.
2 Wireless adapters come with software sometimes called a “utility” that you install on your
computer. See your wireless adapter’s User’s Guide for information on how to do that.
3 After you’ve installed the utility, open it. If you cannot see your utility’s icon on your screen, go to
Sta rt > Progr am s and click on your utility in the list of programs that appears. The utility displays
a list of APs within range, as shown in the example screen below.