User's Manual
Table Of Contents
- EMG2926-Q10A
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Static Route
- Firewall
- Content Filtering
- Parental Control
- IPv6 Firewall
- StreamBoost Management
- Remote Management
- Universal Plug-and-Play (UPnP)
- USB Media Sharing
- Port Configuration
- Maintenance
- Troubleshooting
- Legal Information
- Index
Chapter 8 Tutorials
EMG2926-Q10A User’s Guide
63
7 Check the status of your wireless connection in the screen below. If your wireless connection is
weak or you have no connection, see the Troubleshooting section of this User’s Guide.
If your connection is successful, open your Internet browser and enter
http://www.zyxel.com or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
8.4 Using Multiple SSIDs on the EMG2926-Q10A
You can configure more than one SSID on a EMG2926-Q10A. See
Section 11.4 on page 99.
This allows you to configure multiple independent wireless networks on the EMG2926-Q10A as if
there were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless security type and
MAC filtering settings. That is, each SSID on the EMG2926-Q10A represents a different access
point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the EMG2926-Q10A
(such as a printer).