User's Manual

Chapter 8 Tutorials
EMG2926-Q10A User’s Guide
64
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers,
B is for guests and C is specific to a VoIP device in the meeting room.
8.4.1 Configuring Security Settings of Multiple SSIDs
The EMG2926-Q10A is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your
EMG2926-Q10A (in router mode).
1 Connect your computer to the LAN port of the EMG2926-Q10A using an Ethernet cable.
2 The default
IP address of the EMG2926-Q10A in router mode is “192.168.0.1”. In this case, your
computer must have an IP address in the range b
etween “192.168.0.2” and “192.168.0.254”.
3 Click St art > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
Appendix B on page 193 for information on changing your computer’s IP address.
4 After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type
“http://192.168.0.1” as the web address in your web browser.
5
Enter “admin” (default) as the user name and click Login .
A
B
C
SSI D_ Gue st
SSI D_ W ork er
SSI D_ VoI P
SSID SECURITY TYPE KEY MAC FILTERING
SSID_Worker WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNetwork Disable
SSID_VoIP WPA-PSK VoIPOnly12345678 Allow
00:A0:C5:01:23:45
SSID_Guest WPA-PSK keyexample123 Disable