User's Manual

EMG2926-Q10A User’s Guide
70
CHAPTER 9
Monitor
9.1 Overview
This chapter discusses read-only information related to the device state of the EMG2926-Q10A.
To access the Monitor screens, go to Ex per t M ode after login, then click .
You can also click the links in the Sum m a ry table of the St a tus screen to view the packets sent/
received as well as the status of clients connected to the EMG2926-Q10A.
9.2 What You Can Do
•Use the Log screens to see the logs for the activity on the EMG2926-Q10A and select the logs
you wish to display (
Section 9.3 on page 70).
•Use the DHCP Table screen to view information related to your DHCP status (
Section 9.4 on
page 71
).
•use the Pa cke t St a t ist ics screen to view port status, packet specific statistics, the "system up
time" and so on (Section 9.5 on page 72).
•Use the W LAN 2 .4 G/ 5 G St at ion Sta t us screen to view the wireless stations that are currently
associated to the EMG2926-Q10A (Section 9.6 on page 73).
9.3 The Log Screen
The Web Configurator allows you to look at all of the EMG2926-Q10A’s logs in one location and
select the logs you wish to display.
9.3.1 View Log
Use the Vie w Log screen to see the logged messages for the EMG2926-Q10A. The log wraps
around and deletes the old entries after it fills. Select what logs you want to see from the Display