User's Manual

Chapter 9 Monitor
EMG2926-Q10A User’s Guide
71
drop list. The log choices depend on your settings in the Log Se t t ing screen. Click Refr e sh to
renew the log screen. Click Clear Log to delete all the logs.
Figure 43 View Log
9.3.2 Log Setting
You can configure which logs to display in the View Log screen. Go to the Log Se t t ing screen and
select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the
screen afresh.
Figure 44 Log Settings
9.4 DHCP Table
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to
obtain TCP/IP configuration at start-up from a server. You can configure the EMG2926-Q10A’s LAN
as a DHCP server or disable it. When configured as a server, the EMG2926-Q10A provides the TCP/
IP configuration for the clients. If DHCP service is disabled, you must have another DHCP server on
that network, or else the computer must be manually configured.
Click Monit or > DHCP Table or Configurat ion > Net w ork > DHCP Se rver > Client List . Read-
only information here relates to your DHCP status. The DHCP table shows current DHCP client
information (including M AC Addr e ss, and I P Addr ess) of all network clients using the EMG2926-
Q10A’s DHCP server.