User's Manual
Table Of Contents
- EMG2926-Q10A
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Static Route
- Firewall
- Content Filtering
- Parental Control
- IPv6 Firewall
- StreamBoost Management
- Remote Management
- Universal Plug-and-Play (UPnP)
- USB Media Sharing
- Port Configuration
- Maintenance
- Troubleshooting
- Legal Information
- Index
Chapter 10 WAN
EMG2926-Q10A User’s Guide
85
Figure 53 Network > WAN > Advanced
The following table describes the labels in this screen.
Table 29 Network > WAN > Advanced
LABEL DESCRIPTION
Multicast Setup
Multicast Select I GMPv1 / v 2 to enable multicasting. This applies to traffic routed from the
WAN to the LAN.
Select N one to disable this feature. This may cause incoming traffic to be dropped or
sent to all connected network devices.
Auto-Subnet Configuration
Enable Auto-IP-
Change mode
Select this option to have the EMG2926-Q10A change its LAN IP address to 10.0.0.1
or
192.168.0.1 accordingly when the EMG2926-Q10A gets a dynamic WAN IP
address in the same subnet as the LAN IP address
192.168.0.1 or 10.0.0.1.
The NAT, DHCP server and firewall functions on the EMG2926-Q10A are still available
in this mode.
Apply Click App ly to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.