User's Manual
Table Of Contents
- EMG2926-Q10A
- User’s Guide
- Technical Reference
- Monitor
- WAN
- Wireless LAN
- LAN
- DHCP Server
- NAT
- DDNS
- Static Route
- Firewall
- Content Filtering
- Parental Control
- IPv6 Firewall
- StreamBoost Management
- Remote Management
- Universal Plug-and-Play (UPnP)
- USB Media Sharing
- Port Configuration
- Maintenance
- Troubleshooting
- Legal Information
- Index
EMG2926-Q10A User’s Guide
86
CHAPTER 11
Wireless LAN
11.1 Overview
This chapter discusses how to configure the wireless network settings in your EMG2926-Q10A. The
EMG2926-Q10A is able to function both 2.4GHz and 5GHz network at the same time. You can have
different wireless and wireless security settings for 2.4GHz and 5GHz wireless LANs. Click
Configura t ion > Ne t w ork > W ir e less LAN 2 .4 G or W ireless LAN 5 G to configure to do so.
See the appendices for more detailed information about wireless networks.
The following figure provides an example of a wireless network.
Figure 54 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are
called wireless clients. The wireless clients use the access point (AP) to interact with other devices
(such as the printer) or with the Internet. Your EMG2926-Q10A is the AP.