User's Manual

Chapter 11 Wireless LAN
EMG2926-Q10A User’s Guide
96
11.3.3 WPA-PSK/WPA2-PSK
Select W PA- PSK or W PA2 - PSK from the Securit y M ode list.
Figure 60 Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK
Authentication
Method
Select Auto or Shared Ke y from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP key to login to
the wireless client. Keep this setting at Auto unless you want to force a key verification
before communication between the wireless client and the EMG2926-Q10A occurs.
Select Shared Ke y to force the clients to provide the WEP key prior to communication.
ASCII Select this option in order to enter ASCII characters as WEP key.
Hex Select this option in order to enter hexadecimal characters as a WEP key.
The preceding "0x", that identifies a hexadecimal key, is entered automatically.
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the EMG2926-Q10A and the wireless
stations must use the same WEP key for data transmission.
If you chose 6 4 - bits, then enter any 5 ASCII characters or 10 hexadecimal characters
("0-9", "A-F").
If you chose 1 2 8 - bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-
9", "A-F").
You must configure at least one key, only one key can be activated at any one time. The
default key is key 1.
Apply Click App ly to save your changes back to the EMG2926-Q10A.
Cancel Click Ca ncel to reload the previous configuration for this screen.
Table 33 Network > Wireless LAN 2.4G/5G > General: Static WEP (continued)
LABEL DESCRIPTION