User`s guide

Dimension ES-1016A/ES-1024A Ethernet Switch
Hardware Description and Installation 2-5
Table 2-1 Network Cable Types
SPEED NETWORK CABLE TYPE
10 Base-T 100Ω 2-pair UTP/STP Category 3, 4 or 5
100 Base-TX 100Ω 2-pair UTP/STP Category 5
2.3.4 Front Panel LEDs
The LED Indicators give real-time information about the status of the switch. The following table provides
descriptions of the LEDs.
Figure 2-7 Front Panel LEDs: ES-1016A
Figure 2-8 Front Panel LEDs: ES-1024A
Table 2-2 The Front Panel LED Descriptions
SYSTEM
LED COLOR STATUS DESCRIPTION
PWR Green On The switch is on and receiving power.
Off The switch is not receiving power.
RJ-45 Ports
LED COLOR STATUS DESCRIPTION
LNK/ACT Green On The port is connected to an Ethernet network.
Blinking The port is receiving or transmitting data.
Off The port is not connected to an Ethernet network.
Amber On The port is operating in full-duplex mode.
Blinking Packet collision occurred on this port.
FDX/COL
Off The port is operating in half-duplex mode.