User's Manual

ManualsBrandsZyXEL Communications ManualsComputers & Accessories802.11b/g Wireless USB Adapter-

Table Of Contents

User’s Guide
Copyright
Certifications
ZyXEL Limited Warranty
Customer Support
Table of Contents
List of Figures
List of Tables
Preface
Getting Started
- 1.1 About Your G-210H
- 1.2 Application Overview
  - 1.2.1 Station Mode
    - 1.2.1.1 Infrastructure
    - 1.2.1.2 Ad-Hoc
- 1.3 G-210H Hardware and Utility Installation
  - 1.3.1 ZyXEL Utility Icon
- 1.4 Configuration Methods
  - 1.4.1 Enabling WZC
  - 1.4.2 Accessing the ZyXEL Utility
Tutorial
- 2.1 Connecting to a Wireless LAN
- 2.2 Creating and Using a Profile
Wireless LAN Network
- 3.1 Wireless LAN Overview
- 3.2 Wireless LAN Security
Wireless Station Mode Configuration
- 4.1 Wireless Station Mode Overview
  - 4.1.1 ZyXEL Utility Screen Summary
- 4.2 The Link Info Screen
- 4.3 The Site Survey Screen
  - 4.3.1 Security Settings
- 4.4 The Profile Screen
  - 4.4.1 Adding a New Profile
- 4.5 The Adapter Screen
Maintenance
- 5.1 The About Screen
- 5.2 Uninstalling the ZyXEL Utility
- 5.3 Upgrading the ZyXEL Utility
Troubleshooting
- 6.1 Problems Starting the ZyXEL Utility
- 6.2 Problem with the Link Quality
- 6.3 Problems Communicating With Other Computers
Product Specifications
Management with Wireless Zero Configuration
- Activating Windows Wireless Zero Configuration
- Connecting to a Wireless Network
- Security Settings
  - Association
  - Authentication
- Ordering the Preferred Networks
Wireless Security
- Types of EAP Authentication
- Dynamic WEP Key Exchange
- WPA and WPA2
- Security Parameters Summary
Setting up Your Computer’s IP Address
- Windows 2000/XP
  - Verifying Settings
Index
- A
- C
- D
- E
- F
- G
- H
- I
- L
- M
- N
- P
- Q
- R
- S
- T
- U
- V
- W
- Z

ZyXEL G-210H User’s Guide

38 Chapter 4 Wireless Station Mode Configuration

The following table describes the labels in this screen.

4.3.1.3 WPA/WPA2

Figure 20 Station Mode: Security Settings: WPA/WPA2

Table 6 Station Mode: Security Setting: WPA-PSK/WPA2-PSK

LABEL DESCRIPTION

Encryption The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are

the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses

a simple common password, instead of user-specific credentials.

Select the encryption type (TKIP or AES) for data encryption.

Refer to Section 3.2.3 on page 30 for more information.

Pre-Shared Key Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-

sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal

characters.

Back Click Back to go to the Site Survey screen to select and connect to another

network.

Save Click Next to confirm your selections and advance to the next screen.

Exit Click Exit to return to the Site Survey screen without saving.