User's Manual

ZyXEL G-210H User’s Guide
40 Chapter 4 Wireless Station Mode Configuration
Figure 21 Station Mode: Security Setting: 802.1x
The following table describes the labels in these screens.
Table 8 Station Mode: Security Settings: IEEE 802.1x
LABEL DESCRIPTION
Authentication
Type
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS, TTLS
and PEAP.
Session
Resumption
Select either Enable or Disable depending on whether or not you wish for the
utility to reconnect your session to the server when your session is over.
Login Name Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
Password This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Certificate This field is only available when you select TLS in the Authentication Type field.
Click Browse to select a certificate.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Server CA Select a certificate authority (CA) from the drop-down box to have the G-210H trust
certificates from that CA only. Select Trust Any to accept certificates from any CA.