User's Manual

ZyXEL G-210H User’s Guide
44 Chapter 4 Wireless Station Mode Configuration
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a wireless frequency and channel number and click Next to continue.
Note: To associate to an Ad-hoc network, you must use the same channel and
wireless frequency as the peer computer.
Figure 24 Station Mode: Profile: Wireless Settings
3 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the G-210H. Refer to Section 4.3.1 on page 36 for detailed information on
wireless security configuration.
Network Type Select Infrastructure to associate to an AP. Select Ad-hoc to associate to a peer
computer.
Power Saving
Mode
Choose from Constantly Awake Mode (CAM) or Power Saving Mode depending
on the type of usage you would like the computer to be in while connecting using
this profile.
Security Please choose from the appropriate security for the Access Point. Follow the
subsequent screens accordingly.
Next Click Next to go to the next screen.
Save Click Save to confirm your selections and advance to the next screen. Refer to
Section 4.3.2 on page 47.
Exit Click Exit to go back to the previous screen without saving.
Table 10 Station Mode: Profile: Add a New Profile (continued)
LABEL DESCRIPTION