User's Manual Part 1
Table Of Contents
- Copyright
- ZyXEL Limited Warranty
- Information for Canadian Users
- Federal Communications Commission (FCC) Interference Statement
- Customer Support
- List of Figures
- List of Tables
- Preface
- Getting Started
- Wireless LAN Network
- Wireless Station Mode Configuration
- Access Point Mode Configuration
- Maintenance
- Troubleshooting
ZyXEL G-220F User’s Guide
Wireless Station Mode Configuration 3-17
Figure 3-12 Station Mode: Adapter
The following table describes the labels in this screen.
Table 3-8 Station Mode: Adapter
LABEL DESCRIPTION
Adapter
Transmission
Rate
Select a transmission speed from the drop-down list box. Choose from Fully Auto
(default), 1 Mbps, 2 Mbps, 5.5 Mbps, 11 Mbps, 6 Mbps, 9 Mbps, 12 Mbps, 18 Mbps,
24 Mbps, 36 Mbps, 48 Mbps, and 54 Mbps.
Preamble Type
Select a preamble type. Choices are Long Preamble, Short Preamble and Auto.
The default setting is Auto.
Refer to Section 2.6 for more information.
Power Saving
Mode
Select Enabled to save power (especially for notebook computers). This forces the
ZyXEL G-220F to go to sleep mode when it is not transmitting data.
When you select Disabled, the ZyXEL G-220F will never go to sleep mode.