User's Manual Part 1

ZyXEL G-220F User’s Guide
Access Point Mode Configuration 4-5
Table 4-2 Access Point Mode: Configuration
LABEL DESCRIPTION
Key x
(where x is a
number
between 1 and
4)
Select this option if you want to manually enter the WEP keys.
Enter the WEP key in the field provided.
If you select 64 Bits in the WEP field.
 Enter either 10 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 11AA22BB33) for HEX key type
or
 Enter 5 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
 Enter either 26 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example, 00112233445566778899AABBCC) for HEX key type
or
 Enter 13 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey12345678) for ASCII key type.
If you select 256 Bits in the WEP field,
 Enter either 58 hexadecimal digits in the range of “A-F”, “a-f” and “0-9” (for
example,
0000111122223333444455556666777788889999AAAABBBBCCCC000011)
for HEX key type
or
 Enter 29 ASCII characters (case sensitive) ranging from “a-z”, “A-Z” and “0-9”
(for example, MyKey111122223333444455556678) for ASCII key type.
The values for the WEP keys must be set up exactly the same on
all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Save
Click Save to save the changes.
Cancel
Click Cancel to discard the changes.
4.4 The MAC Filter Screen
The MAC Filter screen allows you to configure the ZyXEL G-220F to give exclusive access to (Accept)
devices or exclude devices from (Reject) connecting to the ZyXEL G-220F. Every Ethernet device has a
unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of