User's Manual Part 2

3
7. A Found New Hardware Wizard windows displays. Select Install the
software automatically (recommended) and click Next.
8. Click Finish to complete the installation process.
Windows 2000
1. Locate an available USB port on the computer.
2. Remove the protective cap to expose the USB connector. Insert the ZyAIR
G-220F to the USB port on the computer. The LED turns on if the ZyAIR
G-220F is properly inserted.
Never bend, force or twist the ZyAIR G-220F into the port.
3. Windows automatically detects the ZyAIR and starts the installation
process. A Welcome screen displays. Click Next.
4. Click Next to accept the default file location or click Browse to select an
alternate folder.
5. When a warning screen displays, click Yes to continue. A Found New
Hardware Wizard windows displays. Select Search for a suitable driver
for my device (recommended) and click Next.
6. Select Search for a suitable device (recommended) and click Next.
7. Select CD-ROM drive and click Next.
8. Click Next when the driver file is located.
9. When a warning screen displays, click Yes to continue.
10. Click Finish to complete the installation.
Windows Me
1. Locate an available USB port on the computer.