User's Manual
Table Of Contents
- User’s Guide
- Copyright
- Federal Communications Commission (FCC) Interference Statement
- ZyXEL Limited Warranty
- Customer Support
- Table of Contents
- List of Figures
- List of Tables
- Preface
- 1. Getting Started
- 2. Wireless LAN Network
- 3. Wireless Station Mode Configuration
- 4. Access Point Mode Configuration
- 5. Maintenance
- 6. Troubleshooting
- A. Product Specifications
- B. Access Point Mode Setup Example
- C. Disable Windows XP Wireless LAN Configuration Tool
- D. Management with Wireless Zero Configuration
- E. Types of EAP Authentication
- F. Setting up Your Computer’s IP Address
- Index
ZyXEL G-220 v2 User’s Guide
36 Chapter 3 Wireless Station Mode Configuration
The following table describes the labels in this screen.
3.2.1 Trend Chart
Click Trend Chart in the Link Info screen to display a screen as shown below. Use this
screen to view real-time data traffic statistics.
Table 3 Station Mode: Link Info
LABEL DESCRIPTION
AP Mode
Station Mode
Use the check box to set the ZyXEL G-220 v2 to operate in wireless station or
access point mode. Refer to Section 1.7.1 on page 25 for more information.
Wireless Network
Status
Profile Name This is the name of the profile you are currently using.
Network Name
(SSID)
The SSID identifies the Service Set to which a wireless station is associated. This
field displays the name of the wireless device to which the ZyXEL G-220 v2 is
associated.
AP MAC Address This field displays the MAC address of the wireless device to which the ZyXEL G-
220 v2 is associated.
Network Type This field displays the network type (Infrastructure(BSS) or Ad Hoc) of the
wireless network.
Transmission Rate This field displays the current transmission rate of the ZyXEL G-220 v2 in megabits
per second (Mbps).
Security This field displays whether data encryption is activated (WEP (WEP or 802.1x),
TKIP (WPA/WPA-PSK/WPA2/WPA2-PSK), AES (WPA/WPA-PSK/WPA2/WPA2-
PSK)) or inactive (DISABLE).
Channel This field displays the radio channel the ZyXEL G-220 v2 is currently using.
Status This field displays the authentication type of the wireless network.
Statistics
Transmit Rate This field displays the current data transmission rate in kilobits per second (Kbps).
Receive Rate This field displays the current data receiving rate in kilobits per second (Kbps).
Authentication This field displays the authentication method of the ZyXEL G-220 v2.
Wireless Mode This field displays the wireless standard (B or G) of the wireless device.
Total Transmit This field displays the total number of data frames transmitted.
Total Receive This field displays the total number of data frames received.
Signal Strength This field displays the signal strength of the ZyXEL G-220 v2.
Trend Chart Click this button to display the real-time statistics of the data rate in kilobits per
second (Kbps).
Signal Strength The status bar shows the strength of the signal.
Link Quality The status bar shows the quality of the signal.