User's Manual

ManualsBrandsZyXEL Communications ManualsComputers & AccessoriesWLAN USB Adapter

Table Of Contents

User’s Guide
Copyright
Federal Communications Commission (FCC) Interference Statement
ZyXEL Limited Warranty
Customer Support
Table of Contents
List of Figures
List of Tables
Preface
1. Getting Started
- 1.1.1 Application Overview
- 1.2 ZyXEL G-220 v2 Hardware and Utility Installation
- 1.4 Windows XP Users Only
  - 1.6.1 Site Survey
  - 1.7.1 Change ZyXEL G-220 v2 Mode
2. Wireless LAN Network
- 2.1.1 SSID
- 2.1.2 Channel
- 2.1.3 Transmission Rate (Tx Rate)
- 2.2.1 Data Encryption with WEP
- 2.2.2 IEEE 802.1x
  - 2.2.2.1 EAP Authentication
- 2.2.3 WPA(2)
  - 2.2.3.1 Encryption
  - 2.2.3.2 User Authentication
- 2.2.4 WPA(2)-PSK Application Example
- 2.2.5 WPA(2) with RADIUS Application Example
- 2.3 Encryption Type
- 2.4 Preamble Type
3. Wireless Station Mode Configuration
- 3.2 The Link Info Screen
  - 3.2.1 Trend Chart
- 3.3 The Site Survey Screen
- 3.4 The Profile Screen
  - 3.4.1 Adding a New Profile
- 3.5 The Adapter Screen
4. Access Point Mode Configuration
- 4.1.1 Additional Setup Requirements
- 4.2 The Link Info Screen
- 4.3 The Configuration Screen
- 4.4 The MAC Filter Screen
5. Maintenance
6. Troubleshooting
- 6.1 Problems Starting the ZyXEL Utility Program
- 6.2 Problem Connecting to an Access Point
- 6.3 Problem with the Link Status
- 6.4 Problems Communicating With Other Computers
A. Product Specifications
B. Access Point Mode Setup Example
- Configuring the Computer on Which You Install the ZyXEL G- 220 v2
- Configuring the Wireless Station Computer
C. Disable Windows XP Wireless LAN Configuration Tool
- Via the Wireless Network System Tray Icon
- Via the Control Panel
D. Management with Wireless Zero Configuration
- Activating Wireless Zero Configuration
- Connecting to a Wireless Network
- Security Settings
- Association
- Authentication
- Ordering the Preferred Networks
E. Types of EAP Authentication
- EAP-MD5 (Message-Digest Algorithm 5)
- EAP-TLS (Transport Layer Security)
- EAP-TTLS (Tunneled Transport Layer Service)
- PEAP (Protected EAP)
- LEAP
- Dynamic WEP Key Exchange
- WPA(2)
- Encryption
- User Authentication
- WPA(2)-PSK Application Example
- WPA(2) with RADIUS Application Example
- Security Parameters Summary
F. Setting up Your Computer’s IP Address
- Windows 95/98/Me
- Installing Components
- Configuring
- Verifying Settings
- Windows 2000/NT/XP
- Verifying Settings
- Macintosh OS 8/9
- Verifying Settings
- Macintosh OS X
- Verifying Settings
Index
- A
- C
- D
- E
- F
- G
- H
- I
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- Z

ZyXEL G-220 v2 User’s Guide

54 Chapter 4 Access Point Mode Configuration

Figure 29 Access Point Mode: Link Info

The following table describes the labels in this screen.

4.3 The Configuration Screen

Click Configuration in the ZyXEL Utility screen to display the screen as shown.

Table 15 Access Point Mode: Link Info

LABEL DESCRIPTION

Status

SSID This field displays the name that identifies your ZyXEL G-220 v2 in the wireless

LAN network.

Current Channel This field displays the radio channel the ZyXEL G-220 v2 is currently using.

Transmission Rate This field displays the current transmission rate of the ZyXEL G-220 v2 in megabits

per second (Mbps).

Security This field shows whether data encryption is activated (WEP) or inactive (Disable).

MAC This field displays the MAC address of the ZyXEL G-220 v2.

Output Power This field shows the strength of the ZyXEL G-220 v2’s antenna gain or

transmission power.

Association List This table lists up to 16 wireless clients that are currently connected to the ZyXEL

G-220 v2.

denotes a wireless client without WEP security.

denotes a wireless client with WEP security enabled.

MAC Address This field displays the MAC addresses of a wireless client that is currently

connected to the ZyXEL G-220 v2.

Refresh Click Refresh to update this screen.