User guide

Dimension GS-3012 Gigabit Ethernet Switch
Introduction to CLI 28-7
Table 28-2 Command Summary: Enable Mode
COMMAND DESCRIPTION
help
Displays help information.
logout
Exits Enable (or privileged) mode.
exit
Exits Enable (or privileged) mode.
history
Displays a list of command(s) that you
have previously executed.
enable
Accesses Enable (or privileged) mode.
disable
Exits Enable (or privileged) mode.
configure
Accesses Configuration mode.
no logging
Clears the system log.
arp
Flushes the ARP (Address Resolution
Protocol) table.
interface <port-
number>
Clears the interface status of the
specified port(s).
show
ip
Displays IP related information.
ip arp
Displays the ARP table.
ip route
Displays IP routing information.
ip route static
Displays IP static route information.
hardware-monitor
<C|F>
Displays current hardware monitor
information with the specified
temperature unit (Celsius C or Fahrenheit
F).
system-information
Displays general system information.
vlan1q gvrp
Displays GVRP setting.
port-isolation
Displays port isolation setting.
spanning-tree config
Displays Spanning Tree Protocol (STP)
settings.
mac address-table
static
Displays static MAC address table.
address-table
<all>
<
mac|vid|port>
Displays MAC address table.
You can sort by MAC address, VID or
port.
lacp
Displays Link Aggregation Control
Protocol information.
trunk
Displays link aggregation information.
radius-server
Displays RADIUS server settings.
port-access-
authenticator
Displays all port authentication settings.